How Gate Valves Work

2023-09-04

The opening and closing part of the gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used pattern gate valve form a wedge shape. The wedge angle varies with the valve parameters, usually 5°, and 2°52' when the medium temperature is not high. The gate of the wedge gate valve can be made into a whole, called a rigid gate; it can also be made into a gate that can produce a small amount of deformation to improve its manufacturability and compensate for the deviation of the sealing surface angle during processing. The plate is called the elastic gate. When the gate valve is closed, the sealing surface can be sealed only by the medium pressure, that is, relying on the medium pressure to press the sealing surface of the gate plate to the valve seat on the other side to ensure the sealing of the sealing surface, which is self-sealing. Most of the gate valve is forced seal, that is to say, when the valve is closed, the gate should be pressed to the valve seat by external force, so as to ensure the sealing surface sealing. The gate valve of the gate valve moves in a straight line with the valve stem, which is called a lifting stem gate valve, also called a rising stem gate valve. Usually there is a trapezoidal thread on the lifter, and through the nut at the top of the valve and the guide groove on the valve body, the rotating motion is changed into a straight line motion, that is to say, the operating torque is changed into the operation thrust. When the valve is opened, when the lift height of the gate plate is equal to 1:1 times the diameter of the valve, the passage of the fluid is completely unblocked, but this position cannot be monitored during operation. In actual use, the apex of the valve stem is used as a sign, that is, the position where the valve stem does not move is taken as its fully open position. In order to consider the locking phenomenon of temperature changes, usually open to the top position, and then return to 1/2-1 turn, as the fully open valve position. Therefore, the fully open position of the valve is determined by the position of the gate, that is, the stroke. In some gate valves, the stem nut is set on the gate plate, and the rotation of the hand wheel drives the valve stem to rotate, and the gate plate is lifted. This kind of valve is called a rotary stem gate valve, or a dark stem gate valve.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy