Gate valve characteristics

light weight

The body is made of high-grade ductile iron, which is about 20%~30% lighter than traditional gate valves, and is easy to install and maintain.

Flat bottom brake seat

Traditional gate valves are usually deposited in the groove of the valve bottom by foreign objects such as stones, wood blocks, cement, iron filings, sundries, etc. after washing the pipe with water, which can easily cause water leakage due to inability to close tightly. The elastic seat seals the bottom of the gate valve. It adopts the same flat-bottom design as the water pipe machine, which is not easy to cause debris to accumulate, so that the fluid can flow unimpeded.

Overall lagging

The gate adopts high-quality rubber for the overall internal and external rubber covering. The European rubber vulcanization technology enables the vulcanized gate to ensure accurate geometric dimensions, and the rubber and nodular cast gate are firmly bonded, not easy to fall off and have good elastic memory.

Precision cast gate valve body

The gate seat valve body adopts precision casting, and the precise geometric dimensions make it possible to ensure the tightness of the valve without any finishing work inside the gate seat valve body.