+86-312-6792432 delia@milestonevalve.com
EnglishEnglish
Home > Products > 2 Inch Natural Gas Ball Valve

China 2 Inch Natural Gas Ball Valve Manufacturers, Suppliers, Factory

Our progress depends on the highly developed products ,great talents and repeatedly strengthened technology forces for 2 Inch Natural Gas Ball Valve,2 Inch Brass Gas Ball Valve With Certification,Thread Ends Full Bore 2 Inch Brass Ball Valve,2 Inch Ends Full Bore Ball Valve,2 Inch Female Thread Brass Ball Valve, We warmly welcome pals from all walks of lifetime to hunt mutual cooperation and generate a far more outstanding and splendid tomorrow.
2 Inch Natural Gas Ball Valve, Our company always concentrate on the development of the international market. We have now a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

Related Products

Hot Products

  • Large Butterfly Valve

    Large Butterfly Valve

    Large butterfly valve is a kind of butterfly valve, which can be divided into pressure maintaining type, locking type and energy storage type. The butterfly valve is suitable for the outlet of water pump and the inlet pipeline of water turbine. It is used as a closed-circuit valve and check valve to avoid and reduce the backflow of medium in the pipeline system and produce excessive water hammer, so as to protect the pipeline system. Today the hammer large butterfly valve will be introduced.
  • Angle Globe Valve

    Angle Globe Valve

    Angle globe valve is mainly used to connect or cut off the medium in the pipeline. The valve opening and closing parts are plug shaped disc and sealing surface is flat or cone. The disc moves in a straight line along the center line of the fluid. The inlet and outlet channels of the globe valve are not in the same direction and form a 90°right Angle.
  • Composite exhaust air valve

    Composite exhaust air valve

    Find a huge selection of Composite exhaust air valve from China at Milestone. Composite exhaust air valve is a barrel shaped valve body, which mainly contains a group of stainless steel balls, rods and plugs. Composite exhaust air valve is installed at the pump water outlet or in the water supply and distribution pipeline to remove a large amount of air accumulated in the pipeline, or a small amount of air accumulated at a higher place of the pipeline is discharged into the atmosphere, so as to improve the service efficiency of the pipeline and the pump Valve quickly inhales outside air to protect the pipeline from damage caused by negative pressure.
  • Non Rising Stem Gate Valve

    Non Rising Stem Gate Valve

    Gate valve is a kind of valve for medium connection and shut- off but not suitable for regulating. Compared with other valves, gate valves have a wider range of combined applications for pressure, service fluid, design pressure and temperature. According to the screw position of the stem, the gate valve can be divided into rising stem gate valves and Non Rising Stem Gate Valve .
  • Knife Gate Valve

    Knife Gate Valve

    Knife gate valve is suitable for pipelines with suspended particles, fiber materials, pulp, sewage, coal slurry, ash cement mixture and other media. These media can be cut off by knife edge gate which can cut fiber materials. In fact, there is no chamber in the valve body. The gate rises and falls in the side guide groove, and is tightly pressed on the valve seat by the lug at the bottom. In order to achieve more tighter, the O-shaped sealing valve seat can be selected to realize bidirectional sealing.
  • Swing Check Valve

    Swing Check Valve

    Swing Check Valve is also known as one-way valve or check valve. Its function is to prevent the medium in the pipeline from flowing back. It is mainly used in the pipeline where the medium flows in one direction. It only allows the medium to flow in one direction to prevent accidents. The Swing Check Valve produced by Milestone Valve Company is designed and manufactured in strict accordance with the GB12236 standard. The pin and valve disc link adopts a built-in structure with excellent performance and reliable sealing. It is widely used in various pipelines in the petroleum, chemical, pharmaceutical, and electric power industries.
  • Related Blog
  • Reviews

  • What are the differences between a floating ball valve and a trunnion ball valve?

    Learn about the differences between a floating ball valve and a trunnion ball valve in this informative article.

  • Direction of Valve Installation

    Many valves are directional in installation, such as globe valve, throttle valve, pressure reducing valve, check valve, etc. if the position is reversed, the service effect and service life of the valve will be affected (such as throttle valve), or it will not work at all (such as pressure reducing valve), or even cause danger (such as check valve). General valve, there is direction mark on the valve body. If not, it should be correctly identified according to the working principle of the valve.

  • Where are pneumatic butterfly valves used?

    In industrial control, the pneumatic actuator principle structure drives the air source from port A, the gear shaft rotates counterclockwise, and the valve Open the pneumatic actuator principle structure in the industrial control to drive the air source from port B, the gear shaft rotates clockwise, and the valve closes.

  • How Gate Valve Works？

    The gate valve can only be fully opened or fully closed, and cannot be used as a valve for regulating flow. Its working principle is that the gate plate moves up and down together with the valve stem, and there are trapezoidal threads on the valve stem.

  • How to Properly Maintain Your Other Valves for Optimal Performance?

    Discover the essential maintenance tips for your valves and keep them performing at their best with this helpful guide!

  • What Should be Paid Attention to When Ball Valve is Applied in Pipeline?

    The two main reasons of ball valve damage are: first, the valve switch is not in place; Second, the sealing surface is damaged.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept