+86-312-6792432 delia@milestonevalve.com
EnglishEnglish
Home > Products > Thread Ends Full Bore 2 Inch Brass Ball Valve

China Thread Ends Full Bore 2 Inch Brass Ball Valve Manufacturers, Suppliers, Factory

Bear "Customer very first, Quality first" in mind, we work closely with our customers and supply them with efficient and professional services for Thread Ends Full Bore 2 Inch Brass Ball Valve,2 Inch Brass Gas Ball Valve With Certification,2 Inch Ends Full Bore Ball Valve,2 Inch Natural Gas Ball Valve,2 Inch Female Thread Brass Ball Valve, We have been self-assured to make excellent achievements within the future. We've been looking forward to becoming one within your most trusted suppliers.
Thread Ends Full Bore 2 Inch Brass Ball Valve, Our solutions have national accreditation requirements for qualified, good quality things, affordable value, was welcomed by individuals all over the world. Our goods will continue to improve inside the order and appear forward to cooperation with you, Genuinely should any of those products be of curiosity to you, remember to letus know. We'll be satisfied to supply you a quotation up on receipt of the comprehensive needs.

Related Products

Hot Products

  • Stainless Steel Wafer Ball Valve

    Stainless Steel Wafer Ball Valve

    Stainless steel wafer ball valve is suitable for Class150, PN1.0 ~ 2.5MPa, the working temperature of 29~180℃ or 29~300℃ all kinds of pipeline, used to cut off or connect the medium in the pipeline. The valve is apply to water, steam, oil, nitric acid, acetic acid, oxidizing medium and other media.
  • Gate Valve For Water Line

    Gate Valve For Water Line

    Gate Valve For Water Line is not used for throttling flow or for frequent operation. Either will cause excessive wear on the seating edges of the discs and guides. Irregular operation may cause the Gate valve for water line to freeze in one position or become difficult to operate.
  • 4 inch Brass Gas Ball Valve With Certification

    4 inch Brass Gas Ball Valve With Certification

    As the professional manufacturer, we would like to provide you 4 inch Brass Gas Ball Valve With Certification.And we will offer you the best after-sale service and timely delivery.The ball has 4 inch(100 mm)nominal diameter. A 4 inch Brass Gas Ball Valve With Certification is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it.
  • Wafer Check Valves

    Wafer Check Valves

    The Wafer check valves are self-acting and fast-closing valves which prevent a working medium from flowing back in a pipeline. They are used in order to prevent from backflow the pumps, fans etc. TWafer check valve is not a shut-off valve.
  • Forged Steel Ball Valve

    Forged Steel Ball Valve

    The forged steel ball valve has the action of rotating 90 degrees, the cock body is a ball, and there is a circular through hole or channel through its axis. Forged steel ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Forged steel ball valve only needs to rotate 90 degrees and a small torque to close tightly.
  • Stainless Steel Welded Ball Valve

    Stainless Steel Welded Ball Valve

    A Stainless Steel Welded Ball Valve is used to control the flow of gas or liquid through a passage. It is distinct from other ball valves because its ball is mounted and welded onto a trunnion at the base and supported by the stem at the top.
  • Related Blog
  • Reviews

  • Three-eccentric Dutterfly Valve Structure Characteristics and Applicable Industry Introduction

    The structure of the butterfly valve is single eccentric, double eccentric, and triple eccentric. Today, we will mainly introduce the following three eccentric butterfly valves.

  • Introduction of Several Kinds of Stainless Steel Gate Valves

    It is a special form of wedge single ram. Compared with wedge gate valve, it has good sealing performance at high temperature, and the gate is not easy to be stuck after being heated; It is suitable for steam, high temperature oil, oil gas and other media, and it is also suitable for frequent switching parts. It is not suitable for medium easy to coking.

  • Globe valve or gate valve for high pressure steam? Which one is better?

    Because steam is generally a high-temperature medium, butterfly valves and ball valves are not suitable, and diaphragm valves and knife gate valves are even more inappropriate. The most commonly used on-off valves for steam are gate valves and globe valves.

  • How to Install The Pneumatic Butterfly Valve

    Before installation, check whether have all parts of the pneumatic butterfly valve, the model is correct, and there is no debris in the valve body, and there is no blockage in the solenoid valve and muffler.

  • What Are the Features of Ball Valves

    The ball valve is not restricted by the installation direction, and the flow direction of the medium can be arbitrary. The fluid resistance is small, and the full-bore ball valve basically has no flow resistance.

  • American Standard of Globe Valve

    American standard globe valves mainly have API and ASME standards. The stop valve designed, manufactured, produced and tested in accordance with the American standard is called the American standard stop valve. The American standard globe valve is mainly used as an opener on gas and liquid medium pipelines to connect and cut off the flow of the medium, not to adjust the flow of the medium.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept