China Wafer Butterfly valve lever operated Manufacturers, Suppliers, Factory

The electric globe valve is composed of an electric actuator and a gate valve. The torque is applied to the valve rod through the electric actuator, and then the valve rod drives the valve disc to move up and down, so that the sealing surface of the valve disc and the sealing surface of the valve seat fit closely to stop the medium flow.

1. The double flow direction can bear pressure to realize the installation mode without flow direction restriction. 2. The design of all metal seal, the seat and sealing ring adopt steli alloy surfacing technology to solve the problem of poor sealing performance of butterfly valve under severe working conditions such as high temperature, high pressure and low temperature. triple eccentric butterfly valve can withstand pressure up to 2500 pounds, and the temperature resistance is as low as -196 ℃ to 850 ℃, the seal reaches 0 leakage and the control ratio is up to 100:1. 3.The triple eccentric butterfly valve seat and valve body are designed separately, and the valve plate and sealing ring are designed separately. The products can be matched and interchanged. The whole valve will not be scrapped because of the seal wear problem. triple eccentric butterfly valve can be used normally only by replacing the valve seat and sealing ring, thus reducing the use cost.

The stainless steel flanged ball valves produced by milestone valve company have two-piece and three piece valve body structures. The middle flange is connected by bolts and the seal is made of nickel base alloy. There is no PTFE bearing on the upper and lower valve stems to reduce friction and save labor. There is no adjusting plate at the bottom of the small shaft to ensure the joint position between the ball and the sealing ring. Stainless steel flanged ball valves can be used for strong electrolytes, organic solvents, acids, gas and other general working materials, as well as standard end materials, such as CO2, hydrogen peroxide, methane gas, butadiene and so on.

Stainless steel wafer ball valve is suitable for Class150, PN1.0 ~ 2.5MPa, the working temperature of 29~180℃ or 29~300℃ all kinds of pipeline, used to cut off or connect the medium in the pipeline. The valve is apply to water, steam, oil, nitric acid, acetic acid, oxidizing medium and other media.

Milestone is China manufacturer & supplier who mainly produces Resilient wedge Iron gate Valves with many years of experience. Resilient wedge Iron gate Valves is a kind of gate valve, and its sealing surface is at a certain angle with the vertical centerline, that is, the two sealing surfaces are wedge-shaped. Resilient wedge Iron gate Valves are divided into bright stem gate valve and dark stem gate valve, wedge single gate valve and wedge double gate valve. The driving methods are: electric, pneumatic, manual, pneumatic and hydraulic, etc. The connection methods are flanged, welded, and clamped.

As the professional manufacturer, we would like to provide you Milestone 2 Inch Natural Gas Ball Valve. And we will offer you the best after-sale service and timely delivery.The valve is made of high-quality brass material and certified for safety and efficiency.If you are looking for a safe and reliable gas ball valve for your home or commercial needs, then the 2 Inch Natural Gas Ball Valve is the ideal choice for you. The valve is made of high-quality brass material and certified for safety and efficiency.