English
Español
Português
русский
Français
日本語
Deutsch
tiếng Việt
Italiano
Nederlands
ภาษาไทย
Polski
한국어
Svenska
magyar
Malay
বাংলা ভাষার
Dansk
Suomi
हिन्दी
Pilipino
Türkçe
Gaeilge
العربية
Indonesia
Norsk
تمل
český
ελληνικά
український
Javanese
فارسی
தமிழ்
తెలుగు
नेपाली
Burmese
български
ລາວ
Latine
Қазақша
Euskal
Azərbaycan
Slovenský jazyk
Македонски
Lietuvos
Eesti Keel
Română
Slovenski
मराठी
Srpski језик Customized Rubber Flap Check Valve Manufacturers, Suppliers and Factory with High Quality
1.Introduction of Rubber Flap Check Valve
The rubber flap check valve is mainly composed of valve body, the valve cover and the rubber flap. The valve is mainly suitable for horizontal installation of water supply and drainage systems. It can be installed at the outlet of the water pump to prevent backflow and water hammer from damaging the pump. This valve can also be installed on the bypass pipe of the reservoir to prevent the pool water from flowing back into the water supply system.
The rubber flap is made of steel plate, steel rod and reinforced nylon cloth as the backing, and the outer layer is made of rubber.
2. Technical Specification of Rubber Flap Check Valve
| Nominal Pressure | 1.0-1.6 Mpa |
| Nominal Diameter | 50-600mm |
| Medium | Water and slightly corrosive liquids |
| Temperature | 0-80 degree |
| Flange Standard | GB/T 17241.6 GB/T9113 |
| Test Standard | GB/T 13927 API598 |
3.Main Parts Material of Rubber Flap Check Valve
| Valve Body | Cast Iron |
| Bonnet | Cast Iron |
| Valve Clack | Steel and reinforced nylon |
4.About Tianjin Milestone Pumu & Valve Co., Ltd.

5.Welcome to contact us
Karen@milestonevalve.com
Cell: +86 15933075581
6. FAQ