China 4 inch Ends Full Bore Ball Valve Manufacturers, Suppliers, Factory

Fluorine lined flange butterfly valve is usually suitable for working conditions with temperature ≤ 200 ℃, corrosiveness or cleanliness requirements. Fluorine lined flange butterfly valve is a kind of polymer material with thick lining technology used in flow passage parts, valve body, butterfly plate and valve stem.

Milestone is a professional China 2 Inch Brass Medium Pressure Ball Valve manufacturer and supplier, if you are looking for the best 2 Inch Brass Medium Pressure Ball Valve with low price, consult us now!

Check valve for water pump is a valve that is used to prevent backflow in a piping system. The pressure of the liquid passing through the pipe will open the valve, while any reversal of flow will close the valve. The check valve will help your water system maintain pressure when the pump shuts off and also prevent backspin, upthrust, and water hammer.

Stainless steel wafer ball valve is suitable for Class150, PN1.0 ~ 2.5MPa, the working temperature of 29~180℃ or 29~300℃ all kinds of pipeline, used to cut off or connect the medium in the pipeline. The valve is apply to water, steam, oil, nitric acid, acetic acid, oxidizing medium and other media.

1. The double flow direction can bear pressure to realize the installation mode without flow direction restriction. 2. The design of all metal seal, the seat and sealing ring adopt steli alloy surfacing technology to solve the problem of poor sealing performance of butterfly valve under severe working conditions such as high temperature, high pressure and low temperature. triple eccentric butterfly valve can withstand pressure up to 2500 pounds, and the temperature resistance is as low as -196 ℃ to 850 ℃, the seal reaches 0 leakage and the control ratio is up to 100:1. 3.The triple eccentric butterfly valve seat and valve body are designed separately, and the valve plate and sealing ring are designed separately. The products can be matched and interchanged. The whole valve will not be scrapped because of the seal wear problem. triple eccentric butterfly valve can be used normally only by replacing the valve seat and sealing ring, thus reducing the use cost.

When the high performance forged steel fixed ball valve works, all the force produced by the fluid pressure in front of the valve on the ball is transferred to the bearing, which will not make the ball move to the valve seat. Therefore, the valve seat has small deformation, stable sealing performance and long service life, which is suitable for high pressure and large diameter applications.